Plantilia:Cvt/dok

Daytoy a plantilia ti {{cvt}} ket kapada ti {{pagbaliwen}}, nga awan iti nagbaliwan: ti {{cvt}} ket agnanayon a nasaaad ti |abbr=on. Ti dokumentasion a makita dita baba ket nailak-am manipud iti {{pagbaliwen/dok}}.

Ti plantilia {{pagbaliwen}} ket karkuluenna dagiti rukod manipud iti maysa a yunit (mabalinmo nga ikabil) itimaysa a sabali, ken kalapsanna daytoy mangipresenta kadagiti resulta. Kaspagariagan:

{{pagbaliwen|2|km|mi}} → 2 kilometro (1.2 mi)

{{pagbaliwen|7|mi|km}} → 7 milia (11 km)

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first value shows unit name spelled out, the second the symbol (or abbreviation). Use |abbr=on/off to change this behaviour:

• {{pagbaliwen|1|lb|kg}} → 1 libra (0.45 kg)

To abbreviate both:

• {{pagbaliwen|1|lb|kg|abbr=on}} → 1 lb (0.45 kg)
• {{pagbaliwen|1|lb|kg|abbr=off}} → 1 libra (0.45 kilogramo)

|abbr=in is the reverse behaviour to the default, |abbr=out:

• {{pagbaliwen|1|lb|kg|abbr=in}} → 1 lb (0.45 kilogramo)

When using scientific notation, the default is for the second (converted) value to display with scientific notation:

• {{pagbaliwen|100|e6mi|e6km}} → 100 riwriw milia (160×10^⁶ km)

To display thousands, millions, etc., while abbreviating both input and output units use |abbr=unit:

• {{pagbaliwen|100|e6mi|e6km|abbr=unit}} → 100 riwriw mi (160 riwriw km)

Convenience: {{cvt}} has |abbr=on by default

Template {{cvt}} is similar to {{convert}}, but has |abbr=on as the default behaviour. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → 1 lb (0.45 kg)

is equal to:

{{pagbaliwen|1|lb|kg|abbr=on}} → 1 lb (0.45 kg)

Adjective: a 10-mile distance

Use |adj=on to produce the adjective form:

• A {{pagbaliwen|10|mi|km|adj=on}} distance → A 10-milia (16 km) distance.

Default behaviour, for comparison:

• {{pagbaliwen|10|mi|km}} to go → 10 milia (16 km) to go.

This option does not work with |abbr=on.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

By definition, 100 ft equals 30.48 m. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{Pagbaliwen}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).

Dagiti pagarigan ti panangipabukel
Maikabil	Maiparang a kas	Nota
{{pagbaliwen|123|ft|m|-1}}	123 kadapan (40 m)
{{pagbaliwen|123|ft|m|0}}	123 kadapan (37 m)
{{pagbaliwen|123|ft|m|1}}	123 kadapan (37.5 m)
{{pagbaliwen|550|ft|m|0}}	550 kadapan (168 m)	Approximate value is 167.64 m
{{pagbaliwen|550|ft|m}}	550 kadapan (170 m)	Rounds to 170, when approximate value is 167.64 m
{{pagbaliwen|500|ft|m|0}}	500 kadapan (152 m)	Approximate value is 152.4 m
{{pagbaliwen|500|ft|m}}	500 kadapan (150 m)	Rounds to 150, when approximate value is 152.4 m

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of 1⁄10 to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{pagbaliwen|1200|ft|m|sigfig=4}} → 1,200 kadapan (365.8 m)
• {{pagbaliwen|1200|ft|m|sigfig=3}} → 1,200 kadapan (366 m)
• {{pagbaliwen|1200|ft|m|sigfig=2}} → 1,200 kadapan (370 m)
• {{pagbaliwen|1200|ft|m|sigfig=1}} → 1,200 kadapan (400 m)

Default behaviour, for comparison:

• {{pagbaliwen|1200|ft|m}} → 1,200 kadapan (370 m)

Setting |sigfig= is meaningless

• {{pagbaliwen|1200|ft|m|sigfig=0}} → 1,200 kadapan (370 m)

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{pagbaliwen|10|m|ft}} → 10 metro (33 ft)
• {{pagbaliwen|10|m|ft|round=5}} → 10 metro (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{pagbaliwen|10|m|ft}} → 10 metro (33 ft)
• {{pagbaliwen|10|m|ft|round=25}} → 10 metro (25 ft)

Default behaviour, for comparison:

• {{pagbaliwen|10|m|ft|sigfig=4}} → 10 metro (32.81 ft)

In a range, one can round each value individually to the default. Use |round=each:

• {{pagbaliwen|10 x 200 x 3000|m|ft}} → 10 babaen ti 200 babaen ti 3,000 metro (33 ft × 656 ft × 9,843 ft)
• {{pagbaliwen|10 x 200 x 3000|m|ft|round=each}} → 10 babaen ti 200 babaen ti 3,000 metro (33 ft × 660 ft × 9,800 ft)

Round to a multiple of a given fraction: 2+3⁄16 inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in 1⁄3).

• {{pagbaliwen|5.56|cm|in|frac=16}} → 5.56 sentimetro (2+3⁄16 in)
• {{pagbaliwen|8|cm|in|frac=4}} → 8 sentimetro (3+1⁄4 in)

The fraction is reduced when possible:

• {{pagbaliwen|8|cm|in|frac=100}} → 8 sentimetro (3+3⁄20 in)

Default behaviour, for comparison:

• {{pagbaliwen|8|cm|in}} → 8 sentimetro (3.150 in)

In temperatures: rounding °C, °F and K

In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{pagbaliwen|10,000|C|F K}} → 10,000 °C (18,000 °F; 10,300 K)
2. {{pagbaliwen|10,000.1|C|F K}} → 10,000.1 °C (18,032.2 °F; 10,273.2 K)
3. {{pagbaliwen|-272|C|F K}} → −272 °C (−457.60 °F; 1.15 K)
4. {{pagbaliwen|-272|C}} → −272 °C (−457.60 °F)
5. {{pagbaliwen|-300|C|F K}} → −300 °C (−508.0 °F; −26.9 K)
6. {{pagbaliwen|0|C|F K}} → 0 °C (32 °F; 273 K)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 grado ti Celsius a panagbaliw is a 0.18 grado ti Fahrenheit a panagbaliw, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → 10,000 °C (18,032 °F)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → 10,000 °C (18,032 °F)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into into five significant output digits because of the two numbers after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

• {{pagbaliwen|10|C|F K}} → 10 °C (50 °F; 283 K)
• {{pagbaliwen|5|km|mi nmi}} → 5 kilometro (3.1 mi; 2.7 nmi)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see #In input and #In output.

Ranges of values

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Dagiti panangisina ti sakop iti {{pagbaliwen}}
Panangisina	Pagbaliwen	Resulta	Dagiti nota
-	{{pagbaliwen|3|-|6|ft}}	3–6 kadapan (0.91–1.83 m)	Mabalin a maikabil ti pangrangtay(-) wenno en dash (–), ti maparuar ket agusar iti en dash
– – (en dash)	{{pagbaliwen|3|–|6|ft}}	3–6 kadapan (0.91–1.83 m)
and	{{pagbaliwen|3|and|6|ft}}	3 ken 6 kadapan (0.91 ken 1.83 m)
and(-)	{{pagbaliwen|3|and(-)|6|ft}}	3 ken 6 kadapan (0.91–1.83 m)	ipangyababa ti |abbr=on ti umuna a yunit
and(-)|abbr=on	{{pagbaliwen|3|and(-)|6|ft|abbr=on}}	3 ken 6 ft (0.91–1.83 m)
or	{{pagbaliwen|3|or|6|ft}}	3 wenno 6 kadapan (0.91 wenno 1.83 m)
to	{{pagbaliwen|3|to|6|ft}}	3 aginggana iti 6 kadapan (0.91 iti 1.83 m)
to(-)	{{pagbaliwen|3|to(-)|6|ft}}	3 iti 6 kadapan (0.91–1.83 m)	Ipangyabab ti |abbr=on ti umuna a yunit
to(-)|abbr=on	{{pagbaliwen|3|to(-)|6|ft|abbr=on}}	3 iti 6 ft (0.91–1.83 m)
to about	{{pagbaliwen|3|to about|6|ft}}	3 aginggana iti agarup a 6 kadapan (0.91 aginggana iti agarup a 1.83 m)
+/-	{{pagbaliwen|3|+/-|6|ft}}	3 ± 6 kadapan (0.91 ± 1.83 m)
± ±	{{pagbaliwen|3|±|6|ft}}	3 ± 6 kadapan (0.91 ± 1.83 m)
+	{{pagbaliwen|3|+|6|ft}}	3 + 6 kadapan (0.91 + 1.83 m)
,	{{pagbaliwen|3|,|6|ft}}	3, 6 kadapan (0.91, 1.83 m)
, and	{{pagbaliwen|3|, and|6|ft}}	3, ken 6 kadapan (0.91, ken 1.83 m)
, or	{{pagbaliwen|3|, or|6|ft}}	3, wenno 6 kadapan (0.91, wenno 1.83 m)
by	{{pagbaliwen|3|by|6|ft}}	3 babaen ti 6 kadapan (0.91 babaen ti 1.83 m)
x	{{pagbaliwen|3|x|6|ft}}	3 babaen ti 6 kadapan (0.91 m × 1.83 m)	Ipangyababa ti |abbr=on ken ulitenna ti umuna a yunit
× ×	{{pagbaliwen|3|×|6|ft}}	3 babaen ti 6 kadapan (0.91 m × 1.83 m)
x|abbr=on	{{pagbaliwen|3|x|6|ft|abbr=on}}	3 ft × 6 ft (0.91 m × 1.83 m)
xx	Nasukatanen ti |xx|. Imbes ket nga usaren ti |x|
*	Nasukatanen ti |*|. Imbes ket nga usaren ti |x|

Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

Use by:

• {{pagbaliwen|6|by|12|ft|m}} → 6 babaen ti 12 kadapan (1.8 babaen ti 3.7 m)

Use ×, multiplication sign, or x, letter:

• {{pagbaliwen|6|x|12|m|ft}} → 6 babaen ti 12 metro (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{pagbaliwen|6|x|12|m|ft|abbr=on}} → 6 m × 12 m (20 ft × 39 ft)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{pagbaliwen|1|ft|3|in|x|3|ft|5|in|mm}} → 1 kadapan 3 pulgada ()

Default behaviour, for comparison:

• {{pagbaliwen|1|ft|3|in|mm}} → 1 kadapan 3 pulgada (380 mm)

Words

Spelling of unit name: UK metre or US meter?

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{pagbaliwen|1|m|ft}} → 1 metro (3.3 ft)—default

{{pagbaliwen|1|m|ft|sp=us}} → 1 metro (3.3 ft)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{pagbaliwen|10|mi|m|spell=in}} → sangapulo milia (16,000 m)

To spell out both in and out values, use |spell=on:

• {{pagbaliwen|10|mi|m|spell=on}} → sangapulo milia (sangapulo ket innem ribo metro)

To make first letter a capital, use |spell=In, |spell=On

• {{pagbaliwen|10|mi|m|spell=In}} → Sangapulo milia (16,000 m)
• {{pagbaliwen|10|mi|m|spell=On}} → Sangapulo milia (sangapulo ket innem ribo metro)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

• {{pagbaliwen|10|mi|m|spell=on|abbr=off|sp=us}} → sangapulo milia (sangapulo ket innem ribo metro)

Inserted before units: 4 planted acres

• {{pagbaliwen|4|acre||adj=pre|planted}} → 4 planted acre (1.6 ha)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{pagbaliwen|4|acre||disp=preunit|planted }} → 4 planted acre (1.6 planted ha)
• {{pagbaliwen|4|acre||disp=preunit|planted |reforested-}} → 4 planted acre (1.6 reforested-ha)

After adjective unit: A 10-kadapan-long corridor

{{pagbaliwen|10|ft|m|adj=mid|-long}} → 10-kadapan-long (3.0 m)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{pagbaliwen|1|metre}} → 1 metro (3 ft 3 in)
• {{pagbaliwen|2|metre}} → 2 metro (6 ft 7 in)
• {{pagbaliwen|2|metre|abbr=on}} → 2 m (6 ft 7 in)

Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

• {{pagbaliwen|100|foot|abbr=off}} → 100 kadapan (30 metro)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

• {{pagbaliwen|1/4|oz|g|spell=in}} → maysa a pagkapat onsa (7.1 g)

Any additional words needed for the fraction can also be added at the end of the template.

• {{pagbaliwen|1/8|imppt|mL|spell=in|adj=pre|iti maysa nga}} → maysa a pagkawalo iti maysa nga imperial a pinta (71 mL)

Numbers

Using an SI prefix: gigameter (Gm), or micrometer (μm)

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

• 12 Gm (1.2×10¹⁰ m)
• 12 μm (1.2×10⁻⁵ m)

The prefix can be added before the SI unit (here: unit m for meter):

• {{pagbaliwen|12|Gm|mi|abbr=on}} → 12 Gm (7,500,000 mi)
• Mm: 12 Mm (7,500 mi)
• km: 12 km (39,000 ft)
• mm: 12 mm (0.47 in)
• μm: 12 μm (0.012 mm)
• um: 12 μm (0.012 mm) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{pagbaliwen|12000|mi|Mm|abbr=on}} → 12,000 mi (19 Mm)
• {{pagbaliwen|12|in|μm|abbr=on}} → 12 in (300,000 μm)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

• {{pagbaliwen|12|μm|μin|abbr=on}} → 12 μm (470 μin)

Engineering notation: 7 × 10⁶ m

In the unit: e6m

Engineering number notations like 7E6 (for 7 × 10⁶) can be entered as a "prefix" to the unit:

• {{pagbaliwen|7|e6m}} → 7 riwriw metro (23,000,000 ft)

The same is possible for the output unit:

• {{pagbaliwen|23,000,000|ft|e6m}} → 23,000,000 kadapan (7.0×10^⁶ m)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

• e3 (sangaribo),
• e6 (riwriw),
• e9 (bilion),
• e12 (trilion),
• e15 (kuadrilion).

Scientific notation: 1.23×10⁻¹⁴

In scientific notation, a number is written like 1.23×10⁻¹⁴. The plain number has exactly one digit before the decimal point.

With {{pagbaliwen}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{pagbaliwen|12.3e-15|atm|atm|abbr=on}} → 12.3×10⁻¹⁵ atm (1.23×10⁻¹⁴ atm)
• {{pagbaliwen|0.00000005|atm|atm|abbr=on}} → 0.00000005 atm (5.0×10⁻⁸ atm)

Input with fractions: 1+1⁄2 pulgada (38.1 mm)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{pagbaliwen|1/2|in|mm|1}} → 1⁄2 pulgada (12.7 mm)
• {{pagbaliwen|1⁄2|in|mm|1}} → 1⁄2 pulgada (12.7 mm)

With integers, use a + sign

• {{pagbaliwen|2+1⁄2|in|mm|1}} → 2+1⁄2 pulgada (63.5 mm)

When negative, use a hyphen - and repeat it:

• {{pagbaliwen|-2-1⁄2|in|mm|1}} → −2+1⁄2 pulgada (−63.5 mm)
• {{pagbaliwen|2-1⁄2|in|mm|1}} → 2–1⁄2 pulgada (50.8–12.7 mm) Note: this is read as a range
• {{pagbaliwen|-2+1⁄2|in|mm|1}} → N Should be a number, not an expression (do not require a calculation)

Output with horizontal fraction bar in: 1/2 inch

Using a double slash (//) returns a horizontal bar fraction:

• {{pagbaliwen|1//2|in|mm|1}} → 1/2 pulgada (12.7 mm)
• {{pagbaliwen|2+1//2|in|mm|1}} → 2+1/2 pulgada (63.5 mm)

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{pagbaliwen|1234567|m|ft}} → 1,234,567 metro (4,050,417 ft)
• {{pagbaliwen|1,234,567|m|ft}} → 1,234,567 metro (4,050,417 ft)
• {{pagbaliwen|1 234 567|m|ft}} → N

Set |comma=off to remove the separator from the output:

• {{pagbaliwen|1234567|m|ft|comma=off}} → 1234567 metro (4050417 ft)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{pagbaliwen|1234567|m|ft|comma=gaps}} → 1234567 metro (4050417 ft)

Default behaviour, for comparison:

• {{pagbaliwen|1234567|m|ft}} → 1,234,567 metro (4,050,417 ft)

Setting |comma=5 or |comma=gaps5 will only add the separator when the number of digits is 5 or more:

• {{pagbaliwen|1234|m|ft|comma=5}} → 1234 metro (4049 ft)
• {{pagbaliwen|1234567|m|ft|comma=5}} → 1,234,567 metro (4,050,417 ft)
• {{pagbaliwen|1234|m|ft|comma=gaps5}} → 1,234 metro (4,049 ft)
• {{pagbaliwen|1234567|m|ft|comma=gaps5}} → 1,234,567 metro (4,050,417 ft)

Default behaviour, for comparison:

• {{pagbaliwen|1234|m|ft}} → 1,234 metro (4,049 ft)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|…:

• {{pagbaliwen|10|m|ft|disp=sqbr}} → 10 metro [33 ft]
• {{pagbaliwen|10|m|ft|disp=comma}} → 10 metro, 33 ft
• {{pagbaliwen|10|m|ft|disp=or}} → 10 metro wenno 33 kadapan

Default behaviour, for comparison:

• {{pagbaliwen|10|m|ft}} → 10 metro (33 ft)

Setting |disp=br will force a new line (<br/>)

• {{pagbaliwen|10|m|ft|disp=br}} → 10 metro
  33 kadapan

Also |disp=br() will force a new line, and keep the brackets:

• {{pagbaliwen|10|m|ft|disp=br()}} → 10 metro
  (33 kadapan)

Setting |disp=x|… allows any text as separator:

• {{pagbaliwen|10|m|ft|disp=x|_MyText_}} → 10 metro_MyText_33 ft—(To display spaces, use  )

Flipping (reordering) the two measurements: 1,609.3 metro (1 milia)

Setting |order=flip will flip (swap) the two measurements:

• {{pagbaliwen|1|mi|m|order=flip}} → 1,609.3 metro (1 milia)

Default behaviour, for comparison:

• {{pagbaliwen|1|mi|m}} → 1 milia (1,609.3 metro)

When converting to multiple units, the effect is:

• {{pagbaliwen|10|km|mi nmi|order=flip}} → 6.2137 milia; 5.3996 nautika milia (10 kilometro)
• {{pagbaliwen|10|km|nmi mi|order=flip}} → 5.3996 nautika milia; 6.2137 milia (10 kilometro)

Displaying parts of the result: 2 (1.5)

It is possible to display only parts of the conversion result:

Convert	Output	Description
{{pagbaliwen|2|cuyd|m3}}	2 kubiko yarda (1.5 m3)	Default behaviour, for comparison
{{pagbaliwen|2|cuyd|m3|abbr=values}}	2 (1.5)	Input and output numbers
{{pagbaliwen|2|cuyd|m3|disp=unit}}	kubiko yarda	Input unit
{{pagbaliwen|2|cuyd|m3|disp=unit|adj=on}}	kubiko-yarda	Input unit, adjective (hyphenated)
{{pagbaliwen|2|cuyd|cuyd|0|disp=out|abbr=off}}	2 kubiko yarda	Input (workaround)
{{pagbaliwen|2|cuyd|m3|abbr=~}}	2 kubiko yarda [cu yd] (1.5 m3)	Input: both name and symbol
{{pagbaliwen|2|cuyd|m3|disp=unit2}}	m3	Output unit (symbol)
{{pagbaliwen|2|cuyd|m3|disp=unit2|abbr=off}}	kubiko metro	Output unit (name)
{{pagbaliwen|2|cuyd|m3|disp=number}}	1.5	Output value
{{pagbaliwen|2|cuyd|m3|disp=out}}	1.5 m3	Output value and unit
{{pagbaliwen|2|cuyd|m3|disp=out|abbr=off}}	1.5 kubiko metro	Output value and unit

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{pagbaliwen|2|kPa|psi|abbr=~}} → 2 kilopascal [kPa] (0.29 psi)
• A {{pagbaliwen|2|kPa|psi|abbr=~|adj=on}} pressure → A 2-kilopascal [kPa] (0.29 psi) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
100 kilometro 62 milia	100 kilometro (62 milia)

Table columns showing numbers only

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{pagbaliwen|10|m|ft|disp=table}} →

style="text-align:right;"|10

|style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{pagbaliwen|20|m|ft|disp=tablecen}} →

style="text-align:center;"|20

|style="text-align:center;"|66

The units are added as a column header:

	m	ft
|disp=table	10	33
|disp=tablecen	20	66
|disp=<other> (default)	30 metro (98 ft)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{pagbaliwen|10|m|ft|sortable=on}} → <span style="display:none">7001100000000000000</span>10 metres (33&nbsp;ft)

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	ft
A	15+3⁄4	52
B	15.5	51
C	16.0	52.5
D	16	52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

'per' units: kg/hl

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectolitre and will be converted with other mass/volume units.

• {{pagbaliwen|1000|kg/hl}} → 1,000 kilogramo kada hektolitro (100 lb/imp gal)

Units of difference: 10 °C higher; how much in °F

When a number is the measurement for a difference, one conversion is done. This may occur in temperatures (°C, °F, K). Compare this to a range, when two conversions are done.

The only available units of difference are: |C-change=, |F-change= and |K-change=.

• {{convert|10|C}} → 10 °C (50 °F), regular temperature
• {{convert|10|C-change}} → 10 °C (18 °F), difference (e.g., "The temperature changed from 30 into 40 °C")
• {{convert|10-15|C}} → 10–15 °C (50–59 °F), range (e.g., "The temperature is between 10 and 15 °C")

Consistently, into multiple units:

• A rise of {{pagbaliwen|10|C-change|F-change K-change}} → A rise of 10 °C (18 °F; 10 K)

Multiple units: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{pagbaliwen|1|yd|2|ft|3|in}} → 1 yarda 2 kadapan 3 pulgada (1.60 m)
• {{pagbaliwen|2|ft|3|in|cm}} → 2 kadapan 3 pulgada (69 cm)
• {{pagbaliwen|1|lb|5|oz|g}} → 1 libra 5 onsa (600 g)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

• {{pagbaliwen|2|m|ftin}} → 2 metro (6 ft 7 in)
• {{pagbaliwen|2|m|ft in}} → 2 metro (6.6 ft; 79 in), using a space, returns the decimal point

Default behaviour, for comparison:

• {{pagbaliwen|2|m}} → 2 metro (6 ft 7 in)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{pagbaliwen|10|$/mi|$/km}} → $10 kada milia ($6.2/km)

You can set the currency in both values using |$=€:

• {{pagbaliwen|10|$/mi|$/km|$=€}} → €10 kada milia (€6.2/km)

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km) N

Listaan ti parametro

Dagiti pagpilian ti parametro para iti {{pagbaliwen}}
Parametro	Pateg	Deskripsion	Nota
|abbr=in		Usaren ti simbolo para iti umuna a (bangir a kanigid) yunit	Simbolo ('pangyababaan')
|abbr=off		Usaren ti nagan para kadagiti amin a yunit	Simbolo ('pangyababaan')
|abbr=none
|abbr=on		Usaren ti symbol for all units	Simbolo ('pangyababaan')
|abbr=out		Usaren ti simbolo para iti bangir ti kanawan a yunit (kasisigud)	Simbolo ('pangyababaan')
|abbr=unit		Usaren ti simbola para kadagiti amin a yunit ng aagus-usar iti sientipiko a notasion	Simbolo ('pangyababaan')
|abbr=values		Ipakita laeng dagiti bilang nga ikabil ken iparauar, saan a dagiti yunit	Dagiti parte laeng
|abbr=~		Mangipakita iti isuda a dua a nagan ti yunit ken simbolo	Simbolo ken nagan
|adj=mid|…		Inkeddeng iti agar-aramat a teksto kalpasan ti maikabil a yunit; mangisaad iti adj=on (pangilasin). Mangnamnama iti 1 a saan a nanaganan a parametro.	Pannaginayon iti balikas, pangilasin
|adj=on		Ti nagan ti yunit ket pangilasin (singular ken naikkan iti pangrangtay)	Gramatika, pangilasin
|adj=pre|…		Inkeddeng ti agar-aramat a teksto sakbay ti maikabil a yunit. Mangnamnama iti 1 a saan a nanaganan a parametro.	Pananginayon iti balikas
|adj=ri0		Pabuklen ti maikabil iti presision ti 0	Pannagipabukel ken dagiti signipikante a pigura
|adj=ri1		Pabuklen ti maikabil iti presision ti 1	Pannagipabukel ken dagiti signipikante a pigura
|adj=ri2		Pabuklen ti maikabil iti presision ti 2	Pannagipabukel ken dagiti signipikante a pigura
|adj=ri3		Pabuklen ti maikabil iti presision ti 3	Pannagipabukel ken dagiti signipikante a pigura
|disp=b		Pagtiponen ti maikabil ken maiparuar babaen ti panagusar iti " (...)" (kasisigud)	Dagiti pateg ti panangitipon
|disp=sqbr		Pagtiponen ti maikabil ken maiparuar babaen ti panagusar iti " [...]"	Dagiti pateg ti panangitipon
|disp=br		Pagtiponen ti maikabil ken maiparuar babaen ti panagusar iti "<br/>"	Dagiti pateg ti panangitipon
|disp=comma		Pagtiponen ti maikabil ken maiparuar babaen ti panagusar iti ", "	Dagiti pateg ti panangitipon
|disp=or		Pagtiponen ti maikabil ken maiparuar babaen ti panagusar iti " or "	Dagiti pateg ti panangitipon
|disp=number		Iparang laeng ti maiparuar a bilang	Dagiti parte laeng
|disp=output number only
|disp=out		Iparang laeng ti maiparuar a bilang ken nagan/simbolo	Dagiti parte laeng
|disp=output only
|disp=preunit|…[|…]		Ti maisengngatto a teksto kalpasan ti pateg ken sakbay dagit yunit, para itiisuda a dua a maikabil ken maiparuar, nga agraman iti pagpilian a sabali a teksto para iti maiparuar. Mangnamnama kadagiti 1 wenno 2 a saan a nanaganan a parametro.	Pananginayon iti balikas
|disp=table		Nasayaat ti maiparuar para iti selula ti tabla nga agraman iti align="right"	Tabla dagiti batong
|disp=tablecen		Nasayaat ti maiparuar para iti selula ti tabla nga agraman iti align="center"	Tabla dagiti batong
|disp=unit		Agiparang laeng iti maikabil a nagan/simbolo (saan a ti maikabil a bilang, saan a ti maiparuar)	Dagiti parte laeng
|disp=unit2		Agiparang laeng iti maiparuarl a nagan/simbolo (saan a ti maikabil; saan a ti maiparuar a bilang)	Dagiti parte laeng
|disp=x|...		Mangitipon ti maikabil ken maiparuar babaen ti panagusar iti teksto nga inkeddeng ti agar-aramat	Pananginayon iti balikas
|comma=5		Usaren laeng ti kaw-it para kadagiti panangisina ti sangaribo no 5 wenno dagiti ad-adu a digit	Pormat ti bilang
|comma=gaps		Usaren dagiti baetan (espasio), saan a kaw-it, para kadagiti panangisina ti sangaribo	Pormat ti bilang
|comma=gaps5		Usaren dagiti baetan (espasio), no laeng 5 wenno dagiti ad-adu a digit	Pormat ti bilang
|comma=off		Awan kadagiti panangisina ti sangaribo	Pormat ti bilang
|frac=N		Ipakita ti imperial a bilang kadagiti praksion, denominator=N	Pormat ti bilang, praksion
|lk=in		Isilpo ti bangir ti kanigid a nagan ti yunit wenno simbolo	Silpo ti yunit
|lk=on		Isilpona amin dagi nagan ti yunit wenno dagiti simbolo (ngem saan a mamindua para iti isu met laeng a yunit)	Silpo ti yunit
|lk=out		Isilpo ti bangir ti kanawan a nagan ti yunit wenno simbolo	Silpo ti yunit
|order=flip		Baliktadenna ti urnos ti maikabil, dagiti rukod ti maiparuar (umuna ti pagbaliwen)	Urnos
|round=5		Pabuklenna ti karkulo iti kaasitgan a pangipaadu iti 5	Pannagipabukel ken dagiti signipikante a pigura
|round=25		Pabuklenna ti karkulo iti kaasitgan a pangipaadu iti 25	Pannagipabukel ken dagiti signipikante a pigura
|round=each		Iti maysa a sakop, ti tunggal maysa a bilang ket maipabukel babaen ti kasisigud a panangipabukel	Pannagipabukel ken dagiti signipikante a pigura
|sigfig=N		Mangipabukel ti maiparuar a bilang kadagiti signipikante a bilang ti N (ti N ket ti maysa a positibo a sibubukel a bilang)	Pannagipabukel ken dagiti signipikante a pigura
|sortable=in		Output numeric hidden sort field for use in a sortable table (naibatay iti maikabil)	Panagurnos iti tabla
|sortable=on
|sortable=out		Output numeric hidden sort field for use in a sortable table (naibatay iti maiparuar)	Panagurnos iti tabla
|sp=us		Usaren ti panangiletra iti E.U. (kas iti "meter" imbes a ti kasisigud a "metro")	Spelling U.S. names
|spell=in		Iletrana ti maikabil a bilang kadagiti balikas	Panangiletra kadagiti bilang
|spell=In		Spell input number in words with first letter uppercase	Panangiletra kadagiti bilang
|spell=on		Spell input and output numbers in words	Panangiletra kadagiti bilang
|spell=On		Spell input and output numbers in words with first letter uppercase	Panangiletra kadagiti bilang
|$=€		Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens)	Pateg kada yunit
|debug=yes		Debugging only. In a sortable table: show the normally hidden sort key	Panagurnos iti tabla
|abbr=comma		Nasukatanen. Usaren ti |comma=off	Pormat ti bilang
|abbr=mos		Nasukatanen. Usaren ti |x| or |by|	Pormat ti sakop
|adj=1		Nasukatanen. Saan nga usaren. No need to deviate from MOS regarding plurals	Plural wenno singular
|adj=flip		Nasukatanen. Usaren ti |order=flip	Urnos
|adj=j		Nasukatanen. Do not use. No need to join number and unit with &nbsp;. Not by MOS, and could be misunderstood HTML	Dagiti pateg ti panangitipon
|adj=nocomma		Nasukatanen. Usaren ti |comma=off	Pormat ti bilang
|disp=2		Nasukatanen. Usaren ti |disp=output only	Dagiti parte laeng
|disp=5		Nasukatanen. Usaren ti |round=5	Pannagipabukel ken dagiti signipikante a pigura
|disp=flip		Nasukatanen. Usaren ti |order=flip	Urnos
|disp=flip5		Nasukatanen. Usaren ti |order=flip |round=5	Urnos, panangipabukel
|disp=nocomma		Nasukatanen. Usaren ti |comma=off	Pormat ti bilang
|disp=u2		Nasukatanen. Usaren ti |disp=unit2	Dagiti parte laeng
|near=5		Nasukatanen. Usaren ti |round=5	Pannagipabukel ken dagiti signipikante a pigura

Dagiti nasukatanen a pagpilian

Dagiti nasukatanen a pagpilian ket naskenda a saan a mausar. Mabalinda nga agpataud kadagiti saan a husto wenno
saan a kayat a resulta ken mabalin a saanto a masaputaran kadagiti baro a bersion.

• Nasukatanen ti abbr=comma. Imbes ket nga usaren ti comma=off
• Nasukatanen ti adj=1. Saanen a nasken nga agusar kadagiti sabali a pagalagadan dagiti ad-adu ngem maysa
• Nasukatanen ti adj=flip. Imbes ket nga usaren ti order=flip
• Nasukatanen ti adj=j. Saanen a nasken nga usaren ti NBSP sakbay ti napno a nagan ti yunit
• Nasukatanen ti adj=nocomma. Use comma=off instead
• Nasukatanen ti disp=2. Imbes ket nga usaren ti disp=output only
• Nasukatanen ti disp=5. Imbes ket nga usaren ti round=5
• Nasukatanen ti* disp=flip. Imbes ket nga usaren ti order=flip
• Nasukatanen ti disp=flip5. Imbes ket nga usaren ti |order=flip |round=5
• Nasukatanen ti disp=nocomma. Imbes ket nga usaren ti comma=off
• Nasukatanen ti disp=slash, disp=s, ken disp=/ . Imbes ket nga usaren ti disp=or
• Nasukatanen ti disp=u2. Imbes ket nga usaren ti disp=unit2
• Nasukatanen ti near=5. Imbes ket nga usaren ti round=5
• Nasukatanen ti sing= iti ania man a situasion. Use adj=
• Nasukatanen ti panangisina ti sakop ti abbr=mos. Imbes ket nga usaren ti |by| wenno |x|
• Nasukatanen ti panangisina ti sakop ti |xx|. Imbes ket nga usaren ti |x|
• Nasukatanen ti panangisina ti sakop ti |*|. Imbes ket nga usaren ti |x|
• Nasukatanen ti panangisina ti sakop ti |&|. Imbes ket nga usaren ti |and|
• Nasukatanen ti panangisina ti sakop ti |to-|. Imbes ket nga usaren tie |to(-)|

TemplateData

Daytoy ti dokumentasion ti TemplateData para iti daytoy plantilia nga inus-usar babaen ti VisualEditor ken dagiti dadduma pay a ramit.

TemplateData para iti Cvt

Converts measurements to other units.

Dagiti parametro ti plantilia[Agtaripato iti TemplateData]

Parametro		Deskripsion	Kita	Kasasaad
value	1	the value to convert	Numero	pagpilian
from unit	2		Linia	pagpilian
to units	3	the unit to convert into	Linia	pagpilian
precision or suffix	4	significant digits after decimal dot or, if negative, exponent of ten	Numero	pagpilian
link units	lk	“on” all, “in” input, “out” output or “off” no units Kasisigud off	Linia	pagpilian
abbreviation	abbr	display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “unit” both input and output units abbreviated when using scientific notation, “values” no units at all Kasisigud out	Linia	pagpilian
spelling	sp	“us” display U.S. spelling of unit names	Linia	pagpilian
adjective	adj	adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end	Linia	pagpilian
conversion	disp	display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision Kasisigud b	Linia	pagpilian
ordering	order	“flip” returns converted value first, input value second.	Linia	pagpilian
significant figures	sigfig	number that sets the number of significant figures	Numero	pagpilian
rounding output	round	“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range	Linia	pagpilian
thousands separator	comma	Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more) Kasisigud on	Linia	pagpilian
sort key	sortable	“on” generates a hidden sort key	Linia	pagpilian

Kitaen pay

• Dagiti baw-ing − no adda, dagiti sabali a nagan daytoy a plantilia a mabalin a mausar